SNGrout®-214 • High Precision • Non-Shrink • Expanding Pouring Grout

SNGrout®-214

High precision, non-shrink, expanding pouring grout for engineering grouting subjected to static & dynamic loads.

View Full PDS Download PDS (PDF)

Quick note: The product information below is presented exactly as per the official Product Data Sheet (PDS).

Product Data Sheet

SNGrout®-214 — Full Product Details

High precision, non-shrink, expanding pouring grout (cement-based, 1-component).

Download Official PDF

Description What it is

⌄

SNGrout®-214 is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, two stage expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering objects subjected to static and dynamic loads.

Characteristics / Advantages Key benefits

⌄

Dual shrinkage compensated.
Suitable for temperature of above 0°C to 200°C.
Adjustable consistency.
Rapid strength development.
Excellent bond to concrete.
No segregation or bleeding.
High final strengths.
Impact and vibration resistant; non-corrosive to anchor bolts, base plate/saddle/frame, sliding plate.
Frost, oil and fire resistant; suitable to use under restraints and grout thickness required.
Maximum flow distance compatible with the dimensions of base plate/saddle/frame.
Resistant to the chemicals, gases etc. being handled in equipment.
Chloride free.

Uses Where to use

⌄

To grout bearings, machine foundations, columns joints in precast construction etc.
To grout anchors in concrete.
To grout cavities, gaps and voids in concrete.
To grout base plate of turbine, compressor, boilers, pumps and heavy machinery.
Sealing around penetrations.
Post fixings.

Product Description Technical info

⌄

Parameter	Value
Composition	Cement, special additives, and aggregates
Packaging	25 kg bag
Appearance / Color	Grey Powder
Shelf life	6 months from date of production
Storage conditions	Store properly in dry conditions in undamaged and unopened original sealed packaging.
Bulk density	1.15–1.60 kg/L (dry powder density) at +27°C
Maximum grain size	2.36 mm
Product declaration	ASTM C1107

Storage note: Keep in dry conditions and unopened original sealed packaging for best shelf life.

Notes & Disclaimer Important

⌄

Important Notice: The information given in this data sheet is to the best of our knowledge true and accurate; but as we have no control over where or how the product is applied, there are no warranties expressed or implied regarding the product’s use or performance. Customers are advised to thoroughly test before adopting them to their own use. It is strongly recommended to trial on small area before large scale application.